Skip to main content

Veeam Backup and Replication Best Practice Guide <WIP>

This is a work in progress

Summary

This document is intended to provide the best practices for using Veeam's Backup and Replication product with the StorONE Storage Appliance Software to Backup, Restore, and Replication Virtual Machines. 

Requirements / Recommedations

StorONE

The testing used to create this document was completed using StorONE version 3.8.0.66.  Later versions of the StorONE code can be applied to this process as well. 

Protocols

StorONE has been certified to be used with Veeam with the following protocols:

N+K Settings

<TBD> Will note that 8+X is not needed for Veeam to be performant

Snapshots/Retention

<TBD>

Recommendations of things NOT to do

It is StorONE's recommendation to avoid using VMDK or RDM storage for the creation of Veeam Storage Repositories

Veeam

Direct Connect Volumes

For direct mounted (block) volumes (StorONE volumes presented directly to the Veeam Server) Veeam has specific recommendations for formatting and block size ( Veeam's Backup and Replication Best Practices )

Windows

Windows 2k19+ use ReFS with 64KB block size

Linux

Format volumes with XFS and 4KB block size

3-2-1 Backup Rule

Veeam Blog Post Regarding the 3-2-1 Backup Rule

Veeam Community Blog Post about the 3-2-1-1-0 "Golden Backup Rule"

Summary of the 3-2-1 method/rule
              • Maintain at least 3 copies of your data
              • Store your backups on at least 2 different medias / storage devices
              • Store at least 1 copy in an offsite location
The additional 1-0 added as technology has advanced
              • 1 Offline or "air-gapped" copy (such as a StorONE snapshot)
              • 0 errors after a backup recovery verification (which can be done with SureBackup)

Setup

Overview

3 Copies

            1 Backup on a Primary Storage Array 1 Backup Copy on a Secondary Storage Array 1 Replication Job to an alternate location
              replicated to a third Storage Array

              2 Different Media

                        1 Primary Storage Array
                          This can be StorONE or another vendor 1 Secondary Storage Array
                            A StorONE Storage Appliance

                            1 Offsite Copy

                                      The replicated copy is to another site, datacenter, and storage
                                        Requires another ESX destination Requires a third storage array

                                        1 Offline Copy

                                                  the 3-2-1-1-0 method is technically calling for the offline copy to be on removable media.  In this scenario the Replicated copy can remain offline until/if needed

                                                  0 Errors

                                                            Configure a SureCopy Veeam job to verify/test the primary backup which will be the basis for the BackupCopy and Replication jobs. 

                                                            Copy 1 / 1st Media device

                                                            Your primary backup copy is on One Storage array.  In these examples, the primary is on StorONE but can also be on another vendor.   

                                                            Process

                                                            Create the Backup Job and name it:

                                                            image.png

                                                            Add your virtual machines to the job:

                                                            image.png

                                                            Next you should select your storage repository.  This is the 1st of the 2 media /storage devices that are recommend

                                                            image.png

                                                            The next screen is optional and dependent on the types of VMs and backup jobs you've created

                                                            image.png

                                                            Next setup the schedule that you want your VMs to backup to

                                                            image.png

                                                            Verify your settings and then choose to run the job when you finish (or let it run as scheduled)

                                                            image.png

                                                            Copy 2 / 2nd Media Device

                                                            Create a Backup Copy Job and choose the copy mode

                                                            image.png

                                                            In the next section you want to choose the Objects that you want to make a Backup Copy from.  Choose from the job that you created for the 1st Copy

                                                            image.png

                                                            image.png

                                                            Next select the backup repository that represents the 2nd media device to backup to

                                                            image.png

                                                            Choose the Data Transfer type appropriate for your environment

                                                            image.png

                                                            Select the time that the Backup Copy job can run

                                                            image.png

                                                            Verify your job settings and enable the job when you click Finish

                                                            image.png